Home > Product List > New Energy Relay > OMRON
 
Pic
Specification

 
Series: G2RG-X(2 Form A, DC500V 10A,Gap 3mm)
Features: • Achieves 500 VDC 10 A switching capacity used
with 2-pole series wiring
• 3.0 mm contact gap (2-pole series wiring)
• Offers high insulation with insulation distance
above 8 mm and impulse withstand voltage of 10
kV between coil and contacts.
• UL and TÜV certified

 
Series: G5PZ-X(1 Form A, DC200V 20A)
Features: • 400 VDC, 20 A / 450 VDC 16 A bidirectional
opening/closing is also possible through a
contact series connection between two product
units
• The 15.2 mm (W) slim size enables
opening/closing of 200 VDC, 20 A regardless
of the polarity
• High sensitivity of 530 mW coil consumption
(further energy-saving effect is realized in an
operating environment with a holding voltage of
50%)
• Min. 5.5 mm of insulation distance between the
coil and contacts, and high insulation of 10 kV
impulse withstand voltage
• A rating of two-contact series connection is
acquired through UL/TÜV/CQC

 
Series: G6QE(1 Form A, AC480V 36A )
Features: • Delivers high capacity switching up to 480 VAC,
36 A(G6QE-1A4 type) in a compact form
• Achieved 10-kV impulse withstand voltage
(between coil and contacts)
• Power consumption reduced to 12% compared with
rated coil consumption by lowering the applied
voltage to the coil after applying nominal
voltage for 100 ms relay operation (Reduced to
35% from rated coil voltage)
• Lineup features models with C-UL, TUV, and CQC
certification as standard, and models compliant
with the Electrical Appliance.
• (IEC/EN) 60079-15 explosion proofing approval
obtained (Model G6QE-1A4 type)

 
Series: G7EB(1 Form A, AC800V 100A /120A, Gap 3.6mm)
Features: • Capable of 480 VAC/100 A high-capacity switching
• New high-capacity series capable of 120 A
electrification
• 60 VDC/100 A for normal/reverse direction
switching
• Ambient temperature 85°C
• High impulse withstand voltage, 10 kV
• Contact gap ≥3.6 mm (Applied to VDE0126)
• Low initial contact resistance ≤5 mΩ

 
Series: G7L(1 Form A, 2 Form A ,30 A/25 A /AC220V, DC/AC Coil , Gap 3mm) )
Features: • No contact chattering for momentary voltage
drops up to 50% of rated voltage.
• Wide-range AC-activated coil that handles 100 to
120 or 200 to 240 VAC at either 50 or 60 Hz.
• Miniature size for maximum switching power,
particularly for inductive loads.
• Flame-resistance materials (UL94V-0-qualifying)
used for all insulation material.
• Quick-connect, screw, and PCB terminals, and DIN
track mounting available.
• Conforms to UL, CSA, TUV and meets IEC950.
• Safety design with contact gap of 3 mm.

 
Series: G7L-PV(2 Form A, AC280V 30A（AC7a级）,Gap 3.0mm)
Features: • High switching capacity with contact rating of
30 A at 280 VAC(AC7a class).
• Power consumption reduced by lowering voltage
applied to coil after rated voltage is applied
(low power consumption of approx. 320 mW when
voltage applied to coil is reduced to 37.5%.).
• Ambient operating temperature of up to 85°C.
• Contact gap of 3.0 mm for safety.
• UL and VDE class F certification for coil
insulation.

 
Series: G7L-X(2 Form A, 30A DC600V/25A DC1,000V ,Gap 6mm /two-pole series wiring)
Features: • DC high capacity switching for both normal and
reverse polarity is available with the addition
of the reverse polarity specification.
• Two poles wired in series to break or switch 600
to 1,000 VDC.
• Contributes to a lower power consumption.
(low power consumption of approx. 600 mW at 50%
reduced coil voltage).
• UL and EN conformed.
• Designed for safety with 6.0-mm contact gap
(two-pole series wiring).
• A series of low contact resistance power relays
with an initial contact resistance of 10 mΩ max.
(with conditions of 5 VDC, 1 A).

 
Series: G9KA(1 Form A, AC 800V 260A/AC 1000V 300A ,Gap 4.0mm)
Features: • Ambient temperature 85°C
• High impulse withstand voltage, 10 kV
• Contact gap ≥4.0 mm (Applied to VDE0126)
• Low initial contact resistance ≤0.2 mΩ
• Rises in board temperatures are suppressed
by a low heat generation and high dissipation
structure.

 
Series: G9KB(1 Form A, DC600V 100A/DC800V 50A, Gap 3.6mm)
Features: • Max. switching voltage 600 VDC (standard model)
/800 VDC (high-capacity model)
• Rated carry/max. switching current 50 A
(standard model) / 100 A (high-capacity model)
• Ambient temperature 85°C
• Contact gap: 3.6 mm or more
• Low initial contact resistance ≤5 mΩ
• The UL60947-4-1 and the EN61810-10 required
for the energy storage system have been
certificated
[1] [2]


頁次:1/2 　

 

12F., No.27-8, Sec. 2, Jhongjheng E. Rd., Danshuei Township, Taipei County 251, Taiwan (R.O.C.)
TEL:886-2-2808-0678 FAX:886-2-2808-0066