Pic
|
Specification |
|
|
|
Series: |
CQ-121
|
|
|
Features: |
● For ATQ Blade Type Fuse
● Insertion & Extraction Force : 1Kg. Min.
● Dielectric Strength For 60 Sec : AC 2000V Min.
● Suitable Rated Current : 15A/250V
● Insulation Resistance At500VDC : 100MΩ Min
● Temperature Rise : 50ºC Max
● Voltage Drop : 20mV Max.
|
|
| |
|
|
|
|
Series: |
JWL Series
|
|
|
Features: |
● Dimension : Φ5.0 x 20 mm
● Materials : Glass Tube
● Electrical Characteristic : Time-Lag
● Installation : DIP
● Approvals : PSE |
|
| |
|
|
|
|
Series: |
multi-stripax®
|
|
|
Features: |
Stripping and cutting tool, Flexible and solid conductors with PVC insulation, 16mm²
Length 250 mm
Width 85 mm
Weight 250 g
Net weight 550 g
|
|
| |
|
|
|
|
Series: |
LPTR 5.08 (5.08 mm, 90°)
|
|
|
Features: |
PCB terminal, 5.08 mm, No. of poles: 1, 90°, Solder pin length (l): 3.2 mm, tinned, Orange, Clamping yoke connection, Clamping range, rated connection, max.: 6 mm², Box
IEC: 500 V / 32 A / 0.5 - 6 mm²
UL: 300 V / 15 A / AWG 26 - AWG 12 |
|
| |
|
|
|
|
Series: |
MT連接系統
|
|
|
Features: |
Mass termination of several discrete wires or ribbon cable in a single operation
Contacts with dual leaf cantilever beams
Posts protected on three sides by housing walls
High production rates with no rejects
Crimp snap-in contacts for subsequent wiring changes
Headers are available in vertical or right-angle flat versions with single row or staggered solder tynes
|
|
| |
|
|
|
|
Series: |
RT Sensitive
|
|
|
Features: |
Dimensions(L x W x H)(mm):29 x 12.7 x 15.7
1 Form A.2 Form A.1 Form C.2 Form C
16A @ 250VAC/30VDC
12A @ 250VAC/30VDC
8A @ 250VAC/30VDC
Max. Switched Current:16A
Max. Switched Voltage: AC 400V/ DC 30V.
Ambient temperature range：-40 ~ +70°C
Immersion cleanable or fluxtight case
Low profile case
10mm coil- tocontact spacing for 5kV isolation |
|
| |
|
|
|
|
Series: |
N系列
|
|
|
Features: |
Performance to 11 GHz (commercial) and 18 GHz (high frequency)
Designed for high-voltage applications. Highly suited for critical applications and environments.
High performance connector for Cellular and PCS Base stations, telephony and broadcast applications
Designated connectors meet the requirements of MIL-C-39012, IEC 169-16 and CECC 22 210
Cable-to-cable, and cable-to-panel versions
|
|
| |
|
|
|
|
Series: |
擴束電纜組件
|
|
|
Features: |
Expanded Beam technology physically expands transmission signal into an optical beam over 14 times original diameter
Ball lens expands cross-sectional area of light over 200 times for MM and over 2000 times for SM
Rugged hermaphroditic construction
Repeatable low-loss performance in harsh environments
|
|
| |
|
|
|
|
Series: |
CPC系列45以太網
|
|
|
Features: |
Economical environmentally sealed connector designed for industrial applications
High strength, impact resistant thermoplastic housing, rated UL 94V-0
Contains wire entry, peripheral, and full interfacial seals
AMP Powerband precision formed power contact (Series 5 and 6)
Type III+ precision formed signal/low current contacts (Series 6)
|
|
| |
