Pic
|
Specification |
|
|
|
Series: |
PAC-GT-0903A-P
|
|
|
Features: |
● Φ9.0 x H4.5 mm
● 3.0 V
● 80 mA
● 15 Ω
● 85 dB
● 2730 Hz
● 0.6 g
|
|
| |
|
|
|
|
Series: |
TSHA-S
|
|
|
Features: |
● Size : 6.0 x 3.5 x 4.3 mm (Straight)
● Operating temperature range : －20℃ to ＋70℃
● Electrical performance
- Rating : 50mA, 12V DC
- Insulation resistance : 100MΩ min. 100V DC
- Dielectric strength : 250V AC for 1 min.
- Contact resistance : 100mΩ max.
● Lifetime : 30,000 Cycles, 50,000 Cycles
● Mechanical performance
- Operating force : 2:160 ± 50gf, 3:260 ± 70gf
- Travel : 0.25 ± 0.1mm
● Reflow solderable.
● Packaged with a 16mm wide embossed taping.
● Sharp "click" feel with a positive tactile feedback. |
|
| |
|
|
|
|
Series: |
UBM-A
|
|
|
Features: |
● Dimension : 5.2Øx20mm
● Ampere Rating : 0.1 ~ 16 A
● Voltage Rating (DC) : 400 V
● Voltage Rating (AC) : 250/277/400 V
● Characteristic : Fast-Acting
● Operating Temperature : -55 ℃ to 125 ℃
● Approvals : TUV, VDE, PSE, cRUus, RU, CSA, CCC, CQC, SEMKO
|
|
| |
|
|
|
|
Series: |
CV-2
|
|
|
Features: |
● For CQ -2005~CQ-2007, CQ-2009~CQ-2011, Fuse block, Material PS |
|
| |
|
|
|
|
Series: |
Stripax® plus 2.5
|
|
|
Features: |
Cutting, stripping and crimping tool, Crimping tool for wire-end ferrules, 0.5mm², 2.5mm², Trapezoidal crimp
Length 210 mm
Weight 260 g
Net weight 250.91 g
|
|
| |
|
|
|
|
Series: |
LXB 15.00/90 (15.00 mm, 90°)
|
|
|
Features: |
PCB terminal, 15.00 mm, 90°, Solder pin length (l): 4.5 mm, tinned, Clamping yoke connection, Clamping range, rated connection, max.: 25 mm²
IEC: 1000 V / 101 A / 1.5 - 25 mm²
UL: 600 V / 85 A / AWG 16 - AWG 4 |
|
| |
|
|
|
|
Series: |
OZ/OZT
|
|
|
Features: |
Dimensions(L x W x H)(mm):29.2 x 12.8 x 20.6
1 Form A,1 Form C
20A @ 120VAC,
16A @ 240VAC,
Max. Switched Current: 20A
Max. Switched Voltage: AC 240V |
|
| |
|
|
|
|
Series: |
錐形針和塊
|
|
|
Features: |
Uninsulated and can be supplied with or without insulation support
Two versions are available -- "F" crimp to terminate the pins and insulation piercing type designed for termination of small, stranded wires and tinsel cords
The solid Taper Block has the recessed insert (11.94 [.047] on either side) which acts as a barrier to voltage creep
|
|
| |
|
|
|
|
Series: |
TERMI-POINT
|
|
|
Features: |
TERMI-POINT clip termination consists of a wire, solid or stranded, connected to a rectangular phosphor bronze clip and retained under pressure
A compressed spring maintains a continual force between the wire and the post, even under extreme environmental conditions
|
|
| |
|
|
