Pic
|
Specification |
|
|
|
Series: |
K43C
|
|
|
Features: |
• 10kV, Make & Break Load Switching, SPDT
• SPDT version of K43
• Vacuum dielectric for power switching low
current loads
• Flange mounting available
• Carries 10 amps at 32 MHz
• Meets requirements of MIL-R-83725
• QPL version available, M83725/16 |
|
| |
|
|
|
|
Series: |
TSWBE
|
|
|
Features: |
● Size : 10.0 x 10.0 x 23.8 mm
● Operating temperature range : －20℃ to ＋70℃
● Electrical performance
- Rating : 50mA, 12V DC
- Insulation resistance : 100MΩ min. 100V DC
- Dielectric strength : 250V AC for 1 min.
- Contact resistance : 100mΩ max.
● Lifetime : 50,000 Cycles, 100,000 Cycles
● Mechanical performance
- Operating force : 2:160 ± 50gf, 3:260 ± 70gf
- Travel : 0.30 ± 0.1mm
● Snap-in type, which can be directly mounted on PC board.
● Part of output terminals can be used as jumper leads, thus making circuit design easy. |
|
| |
|
|
|
|
Series: |
PAC-WT-1601-P
|
|
|
Features: |
● Φ 16.0 x H14.0 mm
● 1.5 V
● 20 mA
● 27 Ω
● 80 dB
● 2048 Hz
● 7.0 g
|
|
| |
|
|
|
|
Series: |
AUB
|
|
|
Features: |
● Dimension : 10.3Øx38.1mm
● Ampere Rating : 0.5 ~ 80 A
● Voltage Rating (AC) : 32/500/600 V
● Operating Temperature : -55 ℃ to 125 ℃
|
|
| |
|
|
|
|
Series: |
CQ-207A
|
|
|
Features: |
● For 6.3x32mm Fuse
● Rated Current : 10A / 250V
● Insulation Resistance At500VDC : 100MΩ Min
● Contact Resistance : 5mΩ At 1A DC
● Dielectric Strength For 60 Sec : AC1500V Min.
● Screw Driver Knob Approval : cRUus
|
|
| |
|
|
|
|
Series: |
CTF 63
|
|
|
Features: |
Crimping tool, Crimping tool for contacts, 0.5mm², 6mm², B-Crimp
Length 250 mm
Weight 730 g
Net weight 686.08 g
|
|
| |
|
|
|
|
Series: |
LSF-SMT 3.81/180 (3.81 mm, 180°) / LSF-SMT 3.50/180 (3.50 mm, 180°)
|
|
|
Features: |
PCB terminal, 3.81 mm & 3.50 mm, 180°, Solder pin length (l): 3.5 mm, tinned, Black, PUSH IN spring connection, Clamping range, rated connection, max.: 1.5 mm², Tube
IEC: 320 V / 17.5 A / 0.2 - 1.5 mm²
UL: 300 V / 12 A / AWG 24 - AWG 16 |
|
| |
|
|
|
|
Series: |
極微型 DUALOBER 跳線器組件
|
|
|
Features: |
Designed for mass crimp termination
One-piece, seamless, spring socket and pin design
Vertical or horizontal PCB mounting direction
Surface mount or through-hole mounting to the PCB
Panel mount options |
|
| |
|
|
|
|
Series: |
電源連接器
|
|
|
Features: |
Single-pole and 2-pole configurations available
Stamped and formed contacts available from 6 AWG - 20 AWG
Loose piece, cold-headed contacts available from 6 AWG - 300 MCM
Built-in interlocking dovetails on single-pole housings allow stacking and wire routing
Integral stainless steel locking spring in housing for contact retention
Hermaphroditic/genderless housings reduce inventory
Accessories available for mounting, vibration, protection, and strain relief
|
|
| |
|
|
