Pic
|
Specification |
|
|
|
Series: |
TSCA
|
|
|
Features: |
● Size : 3.5 x 3.0 x 1.8 mm
● Operating temperature range : －20℃ to ＋70℃
● Electrical performance
- Rating : 50mA, 12V DC
- Insulation resistance : 100MΩ min. 100V DC
- Dielectric strength : 250V AC for 1 min.
- Contact resistance : 100mΩ max.
● Lifetime : 50,000 Cycles, 100,000 Cycles
● Mechanical performance
- Operating force : 2:160 ± 50gf, 3:260 ± 70gf - Travel : 0.25 ± 0.1mm
● Improve mounting density of components on PC board.
● Reflow solderable.
● Sharp "click" feel with a positive tactile feedback.
● Packaged with a 12mm wide embossed taping. |
|
| |
|
|
|
|
Series: |
PAC-PB-4216-P
|
|
|
Features: |
● Φ41.0 x H16.0 mm
● 12.0 V
● 10 mA
● 96 dB
● 2800 Hz
● 9.0 g
|
|
| |
|
|
|
|
Series: |
R30
|
|
|
Features: |
● Fuse Type : Polymeric Positive Temperature Coefficient
● Ampere Rating : 0.3A - 9A
● Maximum Voltage Rating : 30V
● Mounting : Through Hole
● Flame Retardance : 94V0
● Approvals : TUV, RU |
|
| |
|
|
|
|
Series: |
CQ-209F4
|
|
|
Features: |
● For 6.3x30/6.3x32mm Fuses
● Rated Current : 20A
● Insulation Resistance At 500VDC : 100MΩ Min
● Contact Resistance : 5mΩ At 1A DC
● Dielectric Strength For 60 Sec : AC1500V Min.
● Body Material : Nylon
● Supply Standard UL Wire-AWG/Length : 12#AWG / 8”Loop
|
|
| |
|
|
|
|
Series: |
MTR 110
|
|
|
Features: |
Crimping tool, Crimping tool, universal hand presses, 6mm², 120mm²
Length 420 mm
Weight 2 kg
Net weight 2,524 g
|
|
| |
|
|
|
|
Series: |
LMZFL 7/135 (7.50 mm, 135°)
|
|
|
Features: |
PCB terminal, 7.50 mm, 135°, Solder pin length (l): 3.5 mm, tinned, Tension clamp connection, Clamping range, rated connection, max.: 2.5 mm², Box
IEC: 1000 V / 24 A / 0.13 - 2.5 mm²
UL: 300 V / 15 A / AWG 26 - AWG 14 |
|
| |
|
|
|
|
Series: |
MTIS (MT 互聯繫統)
|
|
|
Features: |
Mass termination of several discrete wires or ribbon cable in a single operation
Contacts with dual leaf cantilever beams
Posts protected on three sides by housing walls
High production rates with no rejects
Crimp snap-in contacts for subsequent wiring changes
Headers are available in vertical or right-angle flat versions with single row or staggered solder tynes
|
|
| |
|
|
|
|
Series: |
樞軸連接器
|
|
|
Features: |
Eliminates need for a tool for termination - just use your finger
Small size and tool-less capability make it perfect for space constrained applications
Terminate wires from either side of the connector or pass wires completely through for bridging connections
Perfect for field-installed products; IDC contacts eliminate need to strip wires |
|
| |
|
|
|
|
Series: |
CX4 電纜組件
|
|
|
Features: |
16 signal positions
Single Data Rate (SDR) and Double Data Rate (DDR) versions
Fully shielded for EMI/RFI protection
Lanyard or jack screw latching available
Available with or without passive equalization
Use with standard 28, 26, and 24 AWG wire
Robust strain relief and wire retention |
|
| |
