Pic
|
Specification |
|
|
|
Series: |
LM2N 5.08 (5.08 mm, 90°)
|
|
|
Features: |
PCB terminal, 5.08 mm, 90°, Solder pin length (l): 3.5 mm, tinned, Orange, Clamping yoke connection, Clamping range, rated connection, max.: 2.5 mm², Box
IEC: 630 V / 17.5 A / 0.2 - 2.5 mm²
UL: 300 V / 15 A / AWG 24 - AWG 14 |
|
| |
|
|
|
|
Series: |
S形懸臂梁 MEAS FN9620
|
|
|
Features: |
Package：S-beam
Operating Mode ：Tension and compression
Unique Features：
• High accuracy
• IP68
• Entry level
Ranges (Lbf)：500 to 10K (100 to 2K)
Max. Over-range：1.5X FS
Output / Span：±10 mV to ±20 mV
Non-linearity：±0.05% FS
Operating Temp.：-40°C to 90°C
Dimensions (mm)：56 x 20 x 60
Typical Applications：Test bed, dynamic fatigue testing, robotics and effectors
|
|
| |
|
|
|
|
Series: |
ECK100B(H),1 Form X (SPST-NO-DM),100A/1000VDC,Bi-directional
|
|
|
Features: |
• Hermetically sealed with ceramic technology
• Allow bi-directional load for main contacts
• Continuous current carrying capacity of up to
100A
• Enhanced breaking capacity up to 1000VDC
• Auxiliary contact version available
• Compatibility with DC-1 utilization category in
IEC60947-4-1
APPLICATIONS
• DC charging station
• Electric vehicle
• Automated Guided Vehicles (AGV)
• Electric forklift
• Battery energy storage systems
• Photovoltaic inverter
APPROVALS
• UL: E82292
• TUV: R50616669
• CE: 724_00007
• CCC approved |
|
| |
|
|
|
|
Series: |
AZEV200 (2 Form A +1 Form B,40 A / 480 VAC,Gap3.42mm)
|
|
|
Features: |
• Designed for IEC 61851 Mode 2 and Mode 3
charging applications
• Dual NO load contacts plus NC mirror contact
acc. EN 60947-4-1 for welding monitoring
• 40 Amp / 480 VAC switching capability(2 Form A
+1 Form B)
• Electrical ratings according IEC 61851-1: CC2 /
50.000 cycles
• Withstands inrush currents according ISO 17409 cl. 8.2.2 and IEC 62752
• Meets IEC 62955, IEC 62752 and IEC 62052-11 short circuit requirements
• Load contact gap ≥ 3.42 mm
• Dielectric strength 5 kVRMS, surge withstand voltage 10 kV
• TÜV, UL / CUR and CQC approvals |
|
| |
|
|
|
|
Series: |
G7L(1 Form A, 2 Form A ,30 A/25 A /AC220V, DC/AC Coil , Gap 3mm) )
|
|
|
Features: |
• No contact chattering for momentary voltage
drops up to 50% of rated voltage.
• Wide-range AC-activated coil that handles 100 to
120 or 200 to 240 VAC at either 50 or 60 Hz.
• Miniature size for maximum switching power,
particularly for inductive loads.
• Flame-resistance materials (UL94V-0-qualifying)
used for all insulation material.
• Quick-connect, screw, and PCB terminals, and DIN
track mounting available.
• Conforms to UL, CSA, TUV and meets IEC950.
• Safety design with contact gap of 3 mm.
|
|
| |
|
|
|
|
Series: |
G3VM-401A/G3VM-401D(TR)(1 Form A, 120mA/400V, DIP4)
|
|
|
Features: |
• Package: DIP 4-pin
• Contact form: 1a (SPST-NO)
• Load voltage: 400 V
Application Examples
• Communication equipment
• Test & Measurement equipment
• Security equipment
• Industrial equipment
• Power circuit
Approved
UL
SEMKO for EN/IEC |
|
| |
|
|
|
|
Series: |
SDT-R
|
|
|
Features: |
Dimensions(L x W x H)(mm):24 x 10.4 x 25
1 Form A (SPST-NO)
SDT-LMR:
5A Tungsten @ 120VAC (TV-5) 25,000ops.
5A @ 250VAC resistive,
5A @ 30VDC resistive.
SDT-DMR:
8A Tungsten @ 120VAC (TV-8) 25,000ops.
10A @ 250VAC resistive,
10A @ 30VDC resistive.
Max. Switched Current:5A(SDT-LMR),10A(SDT-DMR)
Max. Switched Voltage: AC: 250V/DC: 30V.
|
|
| |
|
|
|
|
Series: |
2.5mm間距連接器
|
|
|
Features: |
Compact, low-profile 2.5mm pitch
Crimp type receptacles accept wires of AWG 30-22 with insulation diameters from 1.0-1.9 mm
2 through 13 positions
|
|
| |
|
|
|
|
Series: |
線對板
|
|
|
Features: |
AMPINNERGY Wire-to-Board
CPC Connectors
Dynamic Series Connectors and Accessories
ICCON Single-Pole Power Connectors
M Series Connectors
Metrimate
MULTI-BEAM XL™ - Power Distribution Connector System
Multimate Contacts
Power/Signal Double-Lock Connectors
Standard Timer (AMP RAST 5 Appliance) Connectors
Universal MATE-N-LOK II
|
|
| |
|
|
