Pic
|
Specification |
|
|
|
Series: |
IHV250(H),1 Form X (SPST-NO-DM),250A/900VDC
|
|
|
Features: |
•Hermetically sealed. Operates in explosive/harsh
environments without oxidation or contamination
of contacts, including long periods of non-
operation
•Inert gases in contact chamber, and arc-blow
magnet, allow contact works in 900VDC condition
•Optional auxiliary contact for easy monitoring of
power contact position
•Built-in coil economizer, only 1.7W hold power @
12VDC and it limits back EMF to 0V. Models
requiring external economizer also available
•Designed accordance to AIAG QS9000
•Not position sensitive, can be mounted in any
orientation
•RoHS compliance
Typical applications
DC Charging, Solar Inverter, Energy Store Station, Test Equipment
Battery Management System, Electric Forklift, AGV, Rail Transit
Motor Control Circuit Isolation, Circuit Protection and Safety in Industrial
Machinery
Approvals
cULus E58304 |
|
| |
|
|
|
|
Series: |
CQ-114
|
|
|
Features: |
● For ATQ Blade Horizontal Clip
● Metal Material : Brass
● Material Thickness : 0.3 mm
● Suitable Rated Current : 15 A
● Fuse Type : ATQ Type
● Plating Type : Bright Tin Plated Bright
|
|
| |
|
|
|
|
Series: |
SCISSOR 2 K
|
|
|
Features: |
Tools, Electrician's scissors
Length 150 mm
Weight 91 g
Net weight 91 g
|
|
| |
|
|
|
|
Series: |
LP1N 5.08 (5.08 mm, 90°) / LP1N 5.00 (5.00 mm, 90°)
|
|
|
Features: |
PCB terminal, 5.08 mm & 5.00 mm, 90°, Solder pin length (l): 3.2 mm, tinned, Orange, Clamping yoke connection, Clamping range, rated connection, max.: 6 mm², Box
IEC: 500 V / 32 A / 0.5 - 6 mm²
UL: 300 V / 20 A / AWG 26 - AWG 12 |
|
| |
|
|
|
|
Series: |
汽車設計和測試用傳感器 MEAS FN4055
|
|
|
Features: |
Package：Seat belt sensor
Operating Mode ：Tension
Unique Features：
• Low operating ranges
• Protected against overload
• Compatible with most seat belts
Ranges (Lbf)：100 to 300N (20 to 60)
Max. Over-range：5X FS
Output / Span：20 mV
Non-linearity：±0.25% FS
Hysteresis：Combined with linearity
Operating Temp.：-40 to 120 °C
Dimensions (mm)：63.5 x 63.5 x 12.7
Typical Applications：Auto crash testing, tension at the belt receptacle
|
|
| |
|
|
|
|
Series: |
AZSR180 (1 Form A,80A/277VAC, Gap 2.05mm)
|
|
|
Features: |
• 80 Amp switching(1 Form A)
• Wide contact gap > 2.05mm
• Holding power <100 mW
• Dielectric strength 5000 Vrms
• Isolation spacing greater than 10 mm
• Double insulation, EN 60730-1 (VDE 0631, part 1)
• Reinforced insulation, EN 60335-1 (VDE 0700,
part 1)
• UL, CUR E44211
• VDE certificate 40044305 |
|
| |
|
|
|
|
Series: |
高密度連接器
|
|
|
Features: |
Connectors comply with demands of high count positions and high density applications.
Up to 126 positions
Housings prevent contacts from being deformed by rocking at mating and unmating
.040 contact has high reliablility for its design
PC board mounting of cap assemblies are improved by adoption of tine plates
|
|
| |
|
|
|
|
Series: |
SRUDH
|
|
|
Features: |
Dimensions(L x W x H)(mm):20.3 x 16.5 x 20.6
1 Form A (SPST-NO) and 1 Form C (SPDT).
12A @ 120VAC resistive,
10A @ 240VAC resistive,
10A @ 28VDC resistive.
4A @ 120VAC inductive (cosø= 0.4),
4A @ 28VDC inductive (L/R=7msec)
Max. Switched Current: 12A.
Max. Switched Voltage: AC 240V/DC 28V. |
|
| |
|
|
|
|
Series: |
VF28
|
|
|
Features: |
Dimensions(L x W x H)(mm): 28.5 x 28.5 x 25.5
1 Form A、1 Form C
Limiting continuous current 20 A at 85°C
2.8 mm quick connect terminals (per SAE J1744) |
|
| |
|
|
